Saniflo is an innovative, inexpensive and painless method to make installing a bathroom as easy as pie. The Saniflo upflush system is unlike other traditional systems on the market.
Instead of laying pipework under the floor, attaching it to the main drain line — the Saniflo upflush pump does all the work for you. Just as the name suggests, these units flush your waste upward and away to the mainline that could be more than feet away.
No other system can do this. Is it a shock - to learn that Saniflo is becoming a popular choice all around the globe? The process is truly simple. The Saniflo above-ground pump includes rotating stainless-steel blades to breaks your waste into pieces like the blades used in a blender. The waste is liquified, to a manageable consistency. You can watch the video below for a demonstration of this. Once pumped, the toilet is refilled with water and the unit is left clean and empty meaning there is no need for maintenance or repair.
Be warned, certain corrosive cleaning products can cause damage to your unit. As you can see, the entire process is quite efficient. Most importantly, it does absolutely nothing to change the experience for the user. The toilet looks and functions exactly as normal. So, the upflush process is finished, where did the waste go? The purpose of the Saniflo system is to connect your new toilet with your main drainpipe. It does so by eliminating the need for installing new plumbing that makes this connection.
The Saniflo system is an efficient, affordable alternative to this complex problem. Related: Types to Toilet Flush Systems. The answer depends on what you need from a new toilet.
If you need to install a macerator toilet in an area that is too far from your main drainpipe, then the answer is yes! But you need to be sure that you purchase a Saniflo system that has a pump which is strong enough to reach your main plumbing.
So, as long as you are sure the system properly addresses your needs, and as long as you or a professional install it correctly, then an upflush toilet can be an affordable and efficient solution to your problem. Saniflo systems are a great solution to a common household problem. If you want to add the convenience of an extra toilet in your basement, laundry room, under the stairs, or anywhere else, then you might require one of these devices.
The macerator is designed to seal shut, preventing any backflow into the toilet itself. That being said, if the system malfunctions in any way, the toilet can become quite smelly. The macerator is sitting directly behind your toilet, so the smell can be unavoidable at times.
The cost of installing a Saniflo toilet breaks down into two categories — installation and purchasing the unit. This toilet type is now getting immense popularity all over the world. The number of principal components of this toilet system is four. The impeller is a part that powers up the Saniflo pump.
Thus, the waste goes through the discharge part and finally gets out of the system. The microswitch is an essential part of the toilet. When it starts working, the impeller also starts working. It is the part that makes it different from another toilet system. It contains some blades that work together to cut the human waste into pieces. Then the flush water washes them away through the pipeline. Before going to the disposal pipe, the waste stays in the toilet tank.
The float switch starts to bring water to the tank according to the amount of waste. Then after raising it to a certain level, the float switch detects the water pressure and activates the microswitch to remove the waste.
The Saniflo toilet system works very efficiently with all of its parts. However, the main difference between a Saniflo toilet and a regular toilet is their discharge method. The discharge method of Saniflo is based on macerating technology. The system contains two main components called saniflo macerator and saniflo pump. Toilets with a macerator include rotating blades like a blender.
After a flush, the blade rotates and makes the solid waste mixing with the water. Then the pump starts working to move the slurry through a discharge pipe.
The waste goes to the sewage system or the holding tank.
0コメント